HP ENVY 13-ah1000 Maintenance and Service Guide - Page 28
Removal and replacement preliminary requirements, Tools required, Service considerations
View all HP ENVY 13-ah1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
4 Removal and replacement preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screw driver ● Magnetic screw driver ● Phillips P00 and P0 screw drivers ● Torx5 screw driver Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures. NOTE: As you remove each subassembly from the computer, place the subassembly (and all accompanying screws) away from the work area to prevent damage. Plastic parts CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the plastic parts. Apply pressure only at the points designated in the maintenance instructions. 20 Chapter 4 Removal and replacement preliminary requirements