HP ENVY 13-ah1000 Maintenance and Service Guide - Page 34

Bottom cover, Five Phillips M2.5×6.6 screws under the rear rubber foot strip

Get HP ENVY 13-ah1000 PDF manuals and user guides View all HP ENVY 13-ah1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Bottom cover Description In natural silver finish In pale gold finish Spare part number L19522-001 L19523-001 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. Remove the keyboard/top cover: 1. Remove the rear (1) and front rubber foot strips (2). The rubber foot strips are included in the Rubber Kit, spare part numbers L19528-001 (in natural silver finish) and L19529-001 (in pale gold finish). 2. Remove the following screws that secure the bottom cover to the computer: (3) Five Phillips M2.5×6.6 screws (under the rear rubber foot strip) (4) Two Phillips M2.0×3.3 screws (under the front rubber foot strip) (5) Two Torx5 M2.0×4.3 screws (front edge of the computer) 3. Use a case utility tool (1) or similar thin plastic tool to separate the rear edge of the bottom cover (2) from the computer. 26 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Bottom cover
Description
Spare part number
In natural silver finish
L19522-001
In pale gold finish
L19523-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
Remove the keyboard/top cover:
1.
Remove the rear
(1)
and front rubber foot strips
(2)
.
The rubber foot strips are included in the Rubber Kit, spare part numbers L19528-001 (in natural silver
finish) and L19529-001 (in pale gold finish).
2.
Remove the following screws that secure the bottom cover to the computer:
(3)
Five Phillips M2.5×6.6 screws (under the rear rubber foot strip)
(4)
Two Phillips M2.0×3.3 screws (under the front rubber foot strip)
(5)
Two Torx5 M2.0×4.3 screws (front edge of the computer)
3.
Use a case utility tool
(1)
or similar thin plastic tool to separate the rear edge of the bottom cover
(2)
from the computer.
26
Chapter 5
Removal and replacement procedures