HP ENVY 13-ah1000 Maintenance and Service Guide - Page 52
TouchPad, the TouchPad cable from the system board.
![]() |
View all HP ENVY 13-ah1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
TouchPad NOTE: The TouchPad spare part kit does not include the TouchPad bracket or TouchPad cable. The TouchPad bracket is available using spare part number L19759-001. The TouchPad cable is available using spare part number L19525-001. Description For use only on computer models in natural silver finish For use only on computer models in pale gold finish Spare part number L19518-001 L19519-001 Before removing the TouchPad, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 26). 5. Remove the battery (see Battery on page 28). Remove the TouchPad: 1. Release the ZIF connector (1) to which TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Remove the two Phillips M2.0×3.2 screws (2) that secure the TouchPad and TouchPad bracket to the keyboard/top cover. 3. Remove the two Phillips M1.5×2.7 screws (3) that secure the TouchPad and TouchPad bracket to the keyboard/top cover. 4. Remove the three Phillips M2.0×2.2 broad head screws (4) that secure the TouchPad to the keyboard/ top cover. 44 Chapter 5 Removal and replacement procedures
![](/manual_guide/products/hewlettpackard-envy-13ah0000-maintenance-service-guide-5ad61ba/52.png)