HP ENVY 13-ah1000 Maintenance and Service Guide - Page 45
Remove the system board., Reverse this procedure to install the system board.
View all HP ENVY 13-ah1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
7. Remove the four Phillips M2.0×3.2 screws (2) that secure the system board to the keyboard/top cover. 8. Release the power connector (1) from the clips built into the keyboard/top cover. 9. Remove the system board (2). 10. Remove the system board. Reverse this procedure to install the system board. Component replacement procedures 37
7.
Remove the four Phillips M2.0×3.2 screws
(2)
that secure the system board to the keyboard/top cover.
8.
Release the power connector
(1)
from the clips built into the keyboard/top cover.
9.
Remove the system board
(2)
.
10.
Remove the system board.
Reverse this procedure to install the system board.
Component replacement procedures
37