HP ENVY 13-aq1000 Maintenance and Service Guide - Page 35

Battery, Rotate the top of the battery upward

Get HP ENVY 13-aq1000 PDF manuals and user guides View all HP ENVY 13-aq1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Battery Table 5-2 Battery description and part number Description Battery Spare Part Number L08496-855 Before removing the battery, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 24). 2. Remove the bottom cover (see Bottom cover on page 25). WARNING! To reduce potential safety issues, use only the user-replaceable battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. Remove the battery: 1. Disconnect the battery cable from the system board (1). 2. Remove the speaker cable from the clips on the bottom of the battery (2). 3. Remove the two Phillips M2.0 × 3.5 screws (3) that secure the battery to the computer. 4. Rotate the top of the battery upward (4), and then pull the battery toward the top of the computer (5) and out from under from the clips (6) that hold it in place. Reverse this procedure to install the battery. Component replacement procedures 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
Battery
Table 5-2
Battery description and part number
Description
Spare Part Number
Battery
L08496-855
Before removing the battery, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
24
).
2.
Remove the bottom cover (see
Bottom cover
on page
25
).
WARNING!
To reduce potential safety issues, use only the user-replaceable battery provided with the
computer, a replacement battery provided by HP, or a compatible battery purchased from HP.
Remove the battery:
1.
Disconnect the battery cable from the system board
(1)
.
2.
Remove the speaker cable from the clips on the bottom of the battery
(2)
.
3.
Remove the two Phillips M2.0 × 3.5 screws
(3)
that secure the battery to the computer.
4.
Rotate the top of the battery upward
(4)
, and then pull the battery toward the top of the computer
(5)
and out from under from the clips
(6)
that hold it in place.
Reverse this procedure to install the battery.
Component replacement procedures
27