HP ENVY 13-aq1000 Maintenance and Service Guide - Page 41
Fingerprint reader, Remove the Phillips M2.0 × 2.0 screw
View all HP ENVY 13-aq1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Fingerprint reader Table 5-7 Fingerprint reader and cable descriptions and part numbers Description Fingerprint reader for use in natural silver models Fingerprint reader for use in pale gold models Fingerprint reader cable Spare part number L52651-001 L53389-001 L53363-001 Before removing the fingerprint reader, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 24). 2. Remove the bottom cover (see Bottom cover on page 25). 3. Remove the battery (see Battery on page 27). Remove the fingerprint reader: 1. Remove the Phillips M2.0 × 2.0 screw (1) that secures the fingerprint reader bracket, and then remove the bracket (2). 2. Disconnect the fingerprint reader cable from the ZIF connector on the system board (3). 3. Remove the fingerprint reader (4). Reverse this procedure to install the fingerprint reader. Component replacement procedures 33