HP ENVY 13-aq1000 Maintenance and Service Guide - Page 40
Front speakers, and then remove the speaker wire from the clips in the computer
![]() |
View all HP ENVY 13-aq1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Front speakers Table 5-6 Front speaker description and part number Description Front speaker kit Spare part number L53402-001 Before removing the front speakers, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 24). 2. Remove the bottom cover (see Bottom cover on page 25). 3. Disconnect the battery (see Battery on page 27). Remove the front speakers: 1. Disconnect the speaker cable from the system board (1). 2. Lift both speakers up (2), and then remove the speaker wire from the clips in the computer (3). TIP: Make sure the rubber gaskets are installed in the holes in the speakers (4) when installing the speakers in the computer. Reverse this procedure to install the front speakers. 32 Chapter 5 Removal and replacement procedures for authorized service provider parts
![](/manual_guide/products/hewlettpackard-envy-13aq0000-maintenance-service-guide-db346ab/40.png)