HP ENVY 13-aq1000 Maintenance and Service Guide - Page 39

TouchPad, that secure

Get HP ENVY 13-aq1000 PDF manuals and user guides View all HP ENVY 13-aq1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

TouchPad Table 5-5 TouchPad and cable descriptions and part numbers Description TouchPad in natural silver finish TouchPad in pale gold finish TouchPad cable Spare part number L53393-001 L53394-001 L53364-001 Before removing the TouchPad, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 24). 2. Remove the bottom cover (see Bottom cover on page 25). 3. Disoonnect the battery (see Battery on page 27). Remove the TouchPad: 1. Disconnect the TouchPad cable from the ZIF connector on the system board (1). 2. Remove the two Phillips M1.6 × 2.5 screws (2) and the two Phillips M2.0 × 3.0 screws (3) that secure the TouchPad bracket to the computer, and then remove the bracket (4). 3. Remove the three Phillips M2.0 × 2.0 screws (5) that secure the TouchPad to the computer, and then remove the TouchPad (6). Reverse this procedure to install the TouchPad. Component replacement procedures 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
TouchPad
Table 5-5
TouchPad and cable descriptions and part numbers
Description
Spare part number
TouchPad in natural silver
finish
L53393-001
TouchPad in pale gold
finish
L53394-001
TouchPad cable
L53364-001
Before removing the TouchPad, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
24
).
2.
Remove the bottom cover (see
Bottom cover
on page
25
).
3.
Disoonnect the battery (see
Battery
on page
27
).
Remove the TouchPad:
1.
Disconnect the TouchPad cable from the ZIF connector on the system board
(1)
.
2.
Remove the two Phillips M1.6 × 2.5 screws
(2)
and the two Phillips M2.0 × 3.0 screws
(3)
that secure the
TouchPad bracket to the computer, and then remove the bracket
(4)
.
3.
Remove the three Phillips M2.0 × 2.0 screws
(5)
that secure the TouchPad to the computer, and then
remove the TouchPad
(6)
.
Reverse this procedure to install the TouchPad.
Component replacement procedures
31