HP ENVY 13-y000 Maintenance and Service Guide - Page 30
Battery, that secures the left speaker cable to the battery.
View all HP ENVY 13-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Battery Description 3-cell, 56-WHr, 4.96-AHr, Li-ion battery (includes cable) Spare part number 789116-005 Before removing the battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Bottom cover on page 20). Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Release the tape (2) that secures the left speaker cable to the battery. 3. Release the right speaker cable (3) from the retention clips built into the battery. 4. Remove the four Phillips M2.0×4.1 screws (1) that secure the battery to the keyboard/top cover. 22 Chapter 5 Removal and replacement procedures