HP ENVY 13-y000 Maintenance and Service Guide - Page 45
Audio jack module, Remove the Phillips PM2.0×2.3 broad head screw
View all HP ENVY 13-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Audio jack module Description Audio jack module (includes cable) Spare part number 801497-011 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 20), and then remove the following components: a. Battery (see Battery on page 22) b. Fan (see Fan on page 30) c. System board (see System board on page 31) d. Display assembly (see Display assembly on page 34) Remove the audio jack module: 1. Remove the Phillips PM2.0×2.3 broad head screw (1) that secures the audio jack module to the keyboard/top cover. 2. Lift front edge of the audio jack module (2) until it rests at an angle. 3. Remove the audio jack module (3) by sliding it up and to the right at an angle. Reverse this procedure to install the audio jack module. Component replacement procedures 37