HP ENVY 13-y000 Maintenance and Service Guide - Page 35
TouchPad, from the keyboard/top cover. The TouchPad cable is secured
View all HP ENVY 13-y000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
TouchPad Description TouchPad (includes cable) Spare part number 906721-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 20). 5. Remove the battery (see Battery on page 22). Remove the TouchPad: 1. Release the zero insertion force (ZIF) connector (1) to which the TouchPad cable is connected, and then disconnect the TouchPad cable from the system board. 2. Detach the TouchPad cable (2) from the keyboard/top cover. (The TouchPad cable is secured to the keyboard/top cover with double-sided adhesive.) 3. Remove the five Phillips PM2.0×2.3 broad head screws (3) that secure the TouchPad to the keyboard/ top cover. 4. Remove the TouchPad (4). Reverse this procedure to install the TouchPad. Component replacement procedures 27