HP ENVY 15-q300 ENVY Notebook Maintenance and Service Guide - Page 35
WLAN module, that secures the service cover to the computer.
View all HP ENVY 15-q300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
WLAN module Description Intel Dual Band Wireless-AC 3160 802.11ac 1×1 WiFi + BT 4.0 Combo Adapter Spare part number 710662-001 CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and then receive a warning message, remove the module to restore device functionality, and then contact technical support. Before removing the WLAN module, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 26). Remove the WLAN module: 1. Close the computer. 2. Turn the computer upside down with the front toward you. 3. Loosen the Phillips PM2.5×5.0 captive screw (1) that secures the service cover to the computer. 4. Lift the back edge of the service cover (2) until it detaches from the computer. 5. Remove the service cover (3). The service cover is available using spare part number 812187-001. 6. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. Component replacement procedures 27