HP ENVY 15-q300 ENVY Notebook Maintenance and Service Guide - Page 70
Keyboard, Subwoofer see
View all HP ENVY 15-q300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Keyboard NOTE: The keyboard spare part kit includes a keyboard cable. For use in country/region Keyboard with backlight for use in Canada (includes keyboard cable and backlight cable) Keyboard with backlight for use in the United States (includes keyboard cable and backlight cable) Spare part number 760743-DB1 760743-001 Before removing the keyboard, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 26), and then remove the following components: a. Service cover (see WLAN module on page 27) b. Hard drive (see Hard drive on page 29) c. Base enclosure (see Base enclosure on page 35) d. System board (see System board on page 46) e. Connector board (see Connector board on page 52) f. Subwoofer (see Subwoofer on page 55) g. Rear speaker (see Speakers on page 57) h. Power button board (see Power button board on page 61) Remove the keyboard: 1. Remove the seven Phillips PM2.0×2.9 screws (1) that secure the keyboard shield to the computer. 2. Release the ground loop tape (2). 62 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts