HP ENVY 15-q300 ENVY Notebook Maintenance and Service Guide - Page 65
Speakers, from the system board.
View all HP ENVY 15-q300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Speakers Description Speakers (include left and right speakers, 2 cables, and 4 isolators) Spare part number 720561-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 26), and then remove the following components: a. Service cover (see WLAN module on page 27) b. Hard drive (see Hard drive on page 29) c. Base enclosure (see Base enclosure on page 35) Remove the speakers: 1. Disconnect the speaker cable (1) from the system board. 2. Release the speaker cables from the clips (2) and routing channel built into the top cover. 3. Remove the four Phillips PM2.5×6.2 screws (3) that secure the speakers to the top cover. Component replacement procedures 57