HP ENVY TouchSmart 15-j078ca HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 - Page 52
Solid-state drive, the computer.
View all HP ENVY TouchSmart 15-j078ca manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Solid-state drive NOTE: This section applies only to computer models equipped with an Intel processor. Description 24-GB solid-state drive Spare part number 720564-001 Before removing the solid-state drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 43). Remove the solid-state drive: 1. Loosen the Phillips PM2.0×4.0 captive screw (1) that secures the service cover to the computer. 2. Lift the rear edge of the service cover (2) and swing it up and forward until it disengages from the computer. 3. Remove the service cover (3). The service cover is available using spare part number 720555-001. 4. Remove the two Phillips PM2.0×2.5 screws (1) that secure the solid-state drive to the system board. (The solid-state drive tilts up.) 44 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts