HP ENVY TouchSmart 15-j078ca HP ENVY 15 Notebook PC and HP ENVY TouchSmart 15 - Page 66

front speaker., between the subwoofer and left

Page 66 highlights

3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 43), and then remove the following components: a. Solid-state drive (see Solid-state drive on page 44) b. Hard drive (see Hard drive on page 47) c. Base enclosure (see Base enclosure on page 55) Remove the display assembly: 1. Release the wireless antenna cables from the clips built into the left rear speaker (1), connector board (2), and top cover (3). 2. Release the wireless antenna cables from the routing channel (4) between the subwoofer and left front speaker. 3. Disconnect the display panel cable (5) and the webcam/microphone module cable (6) from the system board. 4. Release the display panel cable and the webcam/microphone module cable from the clips and routing channel built into the right rear speaker (7). 58 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126

3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
43
), and then remove the following components:
a.
Solid-state drive (see
Solid-state drive
on page
44
)
b.
Hard drive (see
Hard drive
on page
47
)
c.
Base enclosure (see
Base enclosure
on page
55
)
Remove the display assembly:
1.
Release the wireless antenna cables from the clips built into the left rear speaker
(1)
, connector
board
(2)
, and top cover
(3)
.
2.
Release the wireless antenna cables from the routing channel
(4)
between the subwoofer and left
front speaker.
3.
Disconnect the display panel cable
(5)
and the webcam/microphone module cable
(6)
from the
system board.
4.
Release the display panel cable and the webcam/microphone module cable from the clips and
routing channel built into the right rear speaker
(7)
.
58
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts