HP ENVY TouchSmart 15-q100 ENVY m6 Notebook PC ENVY Notebook PC Maintenance an - Page 46
Hard drive, Release the zero insertion force ZIF connector
View all HP ENVY TouchSmart 15-q100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket or hard drive connector cable. The hard drive bracket and hard drive connector cable are included in the Hard Drive Hardware Kit, spare part number 720545-001. Description For use on all computer models: 1.5-TB, 5400-rpm, 9.5-mm 1.0-TB, 5400-rpm, 9.5-mm 750-GB, 5400-rpm, 9.5-mm 750-GB, 5400-rpm, 9.5-mm, 8-GB hybrid 1.0-TB, 5400-rpm, SATA, 7.0-mm, hybrid 8-GB 500-GB, 5400-rpm, SATA, 9.5-mm 500-GB, 5400-rpm, SATA, 7.0-mm, hybrid 8-GB Spare part number 747375-001 778192-001 652012-001 732001-001 731999-001 778186-001 732000-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 34). 5. Remove the service cover (see WLAN module on page 35). Remove the hard drive: 1. Release the zero insertion force (ZIF) connector (1) to which the hard drive connector cable is attached, and then disconnect the hard drive connector cable (2) from the system board. 2. Release the hard drive connector cable from the tab (3) in the base enclosure. 38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts