HP ENVY TouchSmart 15-q100 ENVY m6 Notebook PC ENVY Notebook PC Maintenance an - Page 74
Subwoofer
View all HP ENVY TouchSmart 15-q100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
3. Release the power connector (3) from the clips and mold built into the top cover. 4. Remove the power connector cable. Reverse this procedure to install the power connector cable. Subwoofer Description Subwoofer (includes cable and 3 isolators) Spare part number 720563-001 Before removing the subwoofer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 34), and then remove the following components: a. Service cover (see WLAN module on page 35) b. Hard drive (see Hard drive on page 38) c. Base enclosure (see Base enclosure on page 45) Remove the subwoofer: 1. Disconnect the subwoofer cable (1) from the system board. 2. Remove the three Phillips PM2.5×6.2 screws (2) that secure the subwoofer to the top cover. 66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts