HP ENVY m4-1100 HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 40

Hard drive, Slide the service cover

Get HP ENVY m4-1100 PDF manuals and user guides View all HP ENVY m4-1100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket, hard drive connector cable, or screws. These components are included in the Hard Drive Hardware Kit, spare part number 698081-001. Description 1-TB, 5400-rpm, 9.5-mm 750-GB, 7200-rpm, 9.5-mm 750-GB, 5400-rpm, 9.5-mm 640-GB, 5400-rpm, 9.5-mm 500-GB, 7200-rpm, 9.5-mm 500-GB, 5400-rpm, 9.5-mm 500-GB, 5400-rpm, 9.5-mm Spare part number 676521-001 633252-001 634250-001 669300-001 634925-001 669299-001 683802-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery). Remove the hard drive: 1. Loosen the Phillips PM2.5×4.5 captive screw (1) that secures the service cover to the computer. 2. Slide the battery release latch (2) to release the service cover. 3. Slide the service cover (3) toward the front of the computer. 4. Remove the service cover (4). The service cover is included in the Service Cover Kit, spare part number 698086-001. 5. Disconnect the hard drive connector cable (1) from the system board. 32 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket, hard drive connector
cable, or screws. These components are included in the Hard Drive Hardware Kit, spare part number
698081-001.
Description
Spare part number
1-TB, 5400-rpm, 9.5-mm
676521-001
750-GB, 7200-rpm, 9.5-mm
633252-001
750-GB, 5400-rpm, 9.5-mm
634250-001
640-GB, 5400-rpm, 9.5-mm
669300-001
500-GB, 7200-rpm, 9.5-mm
634925-001
500-GB, 5400-rpm, 9.5-mm
669299-001
500-GB, 5400-rpm, 9.5-mm
683802-001
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
).
Remove the hard drive:
1.
Loosen the Phillips PM2.5×4.5 captive screw
(1)
that secures the service cover to the computer.
2.
Slide the battery release latch
(2)
to release the service cover.
3.
Slide the service cover
(3)
toward the front of the computer.
4.
Remove the service cover
(4)
.
The service cover is included in the Service Cover Kit, spare part number 698086-001.
5.
Disconnect the hard drive connector cable
(1)
from the system board.
32
Chapter 4
Removal and replacement procedures