HP ENVY m4-1100 HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 62
System board, Battery, Hard drive, Optical drive, WLAN module, Keyboard, Top cover, Memory module
View all HP ENVY m4-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
System board Description System board (includes replacement thermal material) Spare part number 698093-501 Before removing the system board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery), and then remove the following components: a. Hard drive (see Hard drive) b. Optical drive (see Optical drive) c. WLAN module (see WLAN module) d. Keyboard (see Keyboard) e. Top cover (see Top cover) NOTE: When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board: ● Memory module (see Memory module) ● RTC battery (see RTC battery) ● Fan/heat sink assembly (see Fan/heat sink assembly) ● Processor (see Processor) 54 Chapter 4 Removal and replacement procedures