HP ENVY m4-1100 HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 69
Remove the power connector cable, from the clip built into the base enclosure.
View all HP ENVY m4-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Remove the power connector cable: 1. Remove the Phillips PM2.0×3.5 screw (1) and the Phillips PM2.0×5.5 screw (2) that secure the power connector and bracket to the base enclosure. 2. Remove the power connector bracket (3). 3. Remove the power connector cable (4) from the clip built into the base enclosure. Reverse this procedure to install the power connector cable. Component replacement procedures 61
Remove the power connector cable:
1.
Remove the Phillips PM2.0×3.5 screw
(1)
and the Phillips PM2.0×5.5 screw
(2)
that secure the
power connector and bracket to the base enclosure.
2.
Remove the power connector bracket
(3)
.
3.
Remove the power connector cable
(4)
from the clip built into the base enclosure.
Reverse this procedure to install the power connector cable.
Component replacement procedures
61