HP ENVY m4-1100 HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 72
Remove the display assembly
View all HP ENVY m4-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Remove the display assembly: 1. Release the grounding tape (1) that is attached to the right display hinge. 2. Release the wireless antenna cables from the retention clip (2) built into the base enclosure. 3. Remove the four Phillips PM2.5×6.5 screws (3) that secure the display assembly to the base enclosure. 4. Remove the display assembly (4). 5. If it is necessary to replace the display bezel or any of the display assembly subcomponents: a. Flex the inside edges of the bottom edge (1), the left and right sides (2), and the top edge (3) of the display bezel until the bezel disengages from the display enclosure. 64 Chapter 4 Removal and replacement procedures
Remove the display assembly:
1.
Release the grounding tape
(1)
that is attached to the right display hinge.
2.
Release the wireless antenna cables from the retention clip
(2)
built into the base enclosure.
3.
Remove the four Phillips PM2.5×6.5 screws
(3)
that secure the display assembly to the
base enclosure.
4.
Remove the display assembly
(4)
.
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Flex the inside edges of the bottom edge
(1)
, the left and right sides
(2)
, and the
top edge
(3)
of the display bezel until the bezel disengages from the display enclosure.
64
Chapter 4
Removal and replacement procedures