HP ENVY m4-1100 HP ENVY m4 Notebook PC Maintenance and Service Guide - Page 61
Remove the optical drive connector cable
View all HP ENVY m4-1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Remove the optical drive connector cable: 1. Disconnect the optical drive connector cable (1) from the system board. 2. Release the three clips (2) built into the base enclosure that secure the optical drive connector to the base enclosure. 3. Remove the optical drive connector cable (3). Reverse this procedure to install the optical drive connector cable. Component replacement procedures 53
Remove the optical drive connector cable:
1.
Disconnect the optical drive connector cable
(1)
from the system board.
2.
Release the three clips
(2)
built into the base enclosure that secure the optical drive connector to
the base enclosure.
3.
Remove the optical drive connector cable
(3)
.
Reverse this procedure to install the optical drive connector cable.
Component replacement procedures
53