HP ENVY m6-1205dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 59
RTC battery, Detach the RTC battery
View all HP ENVY m6-1205dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
RTC battery Description RTC battery (includes cable and double-sided tape) Spare part number 672349-001 Before removing the RTC battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 47). 5. Remove the service cover (see Hard drive on page 48). Remove the RTC battery: 1. Disconnect the RTC battery cable (1) from the system board. 2. Detach the RTC battery (2) from the base enclosure. (The RTC battery is attached to the base enclosure with double-sided tape.) 3. Remove the RTC battery. Reverse this procedure to install the RTC battery. Component replacement procedures 51