HP ENVY m6-1205dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 80
TouchPad button board, Turn the top cover upside down, with the front toward you.
View all HP ENVY m6-1205dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
TouchPad button board Description TouchPad button board (includes TouchPad button board cable and TouchPad cable) Spare part number 686919-001 Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 47), and then remove the following components: a. Hard drive (see Hard drive on page 48) b. Optical drive (see Optical drive on page 52) c. Keyboard (see Keyboard on page 56) d. Top cover (see Top cover on page 65) Remove the TouchPad button board: 1. Turn the top cover upside down, with the front toward you. 2. Release the ZIF connector to which the TouchPad board cable is attached, and then disconnect the TouchPad board cable (1) from the TouchPad board. 3. Remove the Phillips PM2.5×3.5 screw (2) that secures the TouchPad button board to the top cover. 72 Chapter 4 Removal and replacement procedures