HP Elite 7200 Maintenance & Service Guide HP Elite 7200 Series Microtower - Page 67
Removing a 3.5-inch Device Media Card Reader Shown, Disconnecting the Media Card Reader Cable
View all HP Elite 7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
4. Disconnect the USB cable from the system board. Figure 8-20 Disconnecting the Media Card Reader Cable 5. Remove the two retainer screws that secure the reader to the bay (1) then slide the reader forward and out of the bay (2). Figure 8-21 Removing a 3.5-inch Device (Media Card Reader Shown) NOTE: To install an external 3.5-inch drive, refer to Installing a Drive into the 3.5-inch External Drive Bay on page 60. Drives 59
4.
Disconnect the USB cable from the system board.
Figure 8-20
Disconnecting the Media Card Reader Cable
5.
Remove the two retainer screws that secure the reader to the bay
(1)
then slide the reader forward
and out of the bay
(2)
.
Figure 8-21
Removing a 3.5-inch Device (Media Card Reader Shown)
NOTE:
To install an external 3.5-inch drive, refer to
Installing a Drive into the 3.5-inch External Drive
Bay
on page
60
.
Drives
59