HP Engage Flex Pro G2 Maintenance and Service Guide - Page 54
Fan duct
View all HP Engage Flex Pro G2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Remove the secondary hard drive from the drive cage: 1. Remove the optical drive cage from the rotating drive cage (see Optical drive cage on page 43). 2. Disconnect the power and data cables (1) from the back of the drive. 3. Press the release button (2), and then slide the drive (3) out of the drive cage. To install the hard drives, reverse the removal procedure. NOTE: You must install screws with grommets into the hard drive to install it into the lower drive bay. You must install shorter M3 screws without grommets into the hard drive to install it into the bay in the drive cage. Fan duct To remove the fan duct, use this procedure and illustration. Before removing the fan duct, follow these steps: Fan duct 47
Remove the secondary hard drive from the drive cage:
1.
Remove the optical drive cage from the rotating drive cage (see
Optical drive cage
on page
43
).
2.
Disconnect the power and data cables
(1)
from the back of the drive.
3.
Press the release button
(2)
, and then slide the drive
(3)
out of the drive cage.
To install the hard drives, reverse the removal procedure.
NOTE:
You must install screws with grommets into the hard drive to install it into the lower drive bay.
You must install shorter M3 screws without grommets into the hard drive to install it into the bay in the
drive cage.
Fan duct
To remove the fan duct, use this procedure and illustration.
Before removing the fan duct, follow these steps:
Fan duct
47