HP Fortis x360 11 inch G5 Chromebook Maintenance and Service Guide Fortis x360 - Page 41

on the board., Disconnect the cables from the two reverse ZIF connectors

Page 41 highlights

Table 5-6 USB board description and part number Description USB board, models with WWAN USB board, models without WWAN SIM card tray, gray SIM card tray, cosmic blue USB board bracket (available in the Bracket Kit) Spare part number N85017-001 N85016-001 N91923-001 N91924-001 N85029-001 Before removing the USB board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 28). 2. Remove the bottom cover (see Bottom cover on page 28). 3. Disconnect the battery cable from the system board (see Battery on page 29). Remove the USB board: 1. Remove the three Phillips M2.0 × 5.0 screws (1) from the bracket on the board, and then remove the bracket (2). 2. Remove the SIM card holder (3) on the side of the computer. 3. Disconnect the cables from the two reverse ZIF connectors (4) on the board. 4. Disconnect the speaker cable (5) from the board 5. Remove the four Phillips M2.0 × 3.0 screws (1) from the board. 36 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74

Table 5-6
USB board description and part number
Description
Spare part number
USB board, models with WWAN
N85017-001
USB board, models without WWAN
N85016-001
SIM card tray, gray
N91923-001
SIM card tray, cosmic blue
N91924-001
USB board bracket (available in the Bracket Kit)
N85029-001
Before removing the USB board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
28
).
2.
Remove the bottom cover (see
Bottom cover
on page
28
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
29
).
Remove the USB board:
1.
Remove the three Phillips M2.0 × 5.0 screws
(1)
from the bracket on the board, and then remove the
bracket
(2)
.
2.
Remove the SIM card holder
(3)
on the side of the computer.
3.
Disconnect the cables from the two reverse ZIF connectors
(4)
on the board.
4.
Disconnect the speaker cable
(5)
from the board
5.
Remove the four Phillips M2.0 × 3.0 screws
(1)
from the board.
36
Chapter 5
Removal and replacement procedures for authorized service provider parts