HP Fortis x360 11 inch G5 Chromebook Maintenance and Service Guide Fortis x360 - Page 42

Second camera module, Remove the battery see

Get HP Fortis x360 11 inch G5 Chromebook PDF manuals and user guides View all HP Fortis x360 11 inch G5 Chromebook manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

6. Lift inside of the board up, and then pull the board (2) into the computer to remove it. To install the USB board, reverse this procedure. Second camera module To remove the second camera module, use these procedures and illustrations. Table 5-7 Second camera module description and part number Description Second camera module Spare part number N91928-001 Before removing the second camera module, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 28). 2. Remove the bottom cover (see Bottom cover on page 28). 3. Remove the battery (see Battery on page 29). Remove the second camera module: 1. Remove the two Phillips M2.0 × 3.0 screws (1) from the bracket over the module, and then remove the bracket (2). 2. Lift up the module (3) so you can access the connector underneath. Second camera module 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
6.
Lift inside of the board up, and then pull the board
(2)
into the computer to remove it.
To install the USB board, reverse this procedure.
Second camera module
To remove the second camera module, use these procedures and illustrations.
Table 5-7
Second camera module description and part number
Description
Spare part number
Second camera module
N91928-001
Before removing the second camera module, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
28
).
2.
Remove the bottom cover (see
Bottom cover
on page
28
).
3.
Remove the battery (see
Battery
on page
29
).
Remove the second camera module:
1.
Remove the two Phillips M2.0 × 3.0 screws
(1)
from the bracket over the module, and then remove
the bracket
(2)
.
2.
Lift up the module
(3)
so you can access the connector underneath.
Second camera module
37