HP Fortis x360 11 inch G5 Chromebook Maintenance and Service Guide Fortis x360 - Page 43

Pen charger, system board.

Get HP Fortis x360 11 inch G5 Chromebook PDF manuals and user guides View all HP Fortis x360 11 inch G5 Chromebook manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

3. Disconnect the cable from the reverse ZIF connector (4) on the camera module. To install the second camera module, reverse this procedure. Pen charger To remove the pen charger, use these procedures and illustrations. Table 5-8 Pen charger description and part number Description Pen charger (in the Cable Kit) Spare part number N85027-001 Before removing the pen charger, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 28). 2. Remove the bottom cover (see Bottom cover on page 28). 3. Disconnect the battery cable from the system board (see Battery on page 29). Remove the pen charger: 1. Lift the tape (1) off the pen charger system board connector. The tape can remain attached to the system board. 2. Disconnect the cable (2) from the system board ZIF connector. 3. Remove the three Phillips M1.6 × 4.0 screws (3) from the charger. 38 Chapter 5 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
3.
Disconnect the cable from the reverse ZIF connector
(4)
on the camera module.
To install the second camera module, reverse this procedure.
Pen charger
To remove the pen charger, use these procedures and illustrations.
Table 5-8
Pen charger description and part number
Description
Spare part number
Pen charger (in the Cable Kit)
N85027-001
Before removing the pen charger, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
28
).
2.
Remove the bottom cover (see
Bottom cover
on page
28
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
29
).
Remove the pen charger:
1.
Lift the tape
(1)
off the pen charger system board connector. The tape can remain attached to the
system board.
2.
Disconnect the cable
(2)
from the system board ZIF connector.
3.
Remove the three Phillips M1.6 × 4.0 screws
(3)
from the charger.
38
Chapter 5
Removal and replacement procedures for authorized service provider parts