HP G72-257CL Compaq Presario CQ72 Notebook PC and HP G72 Notebook PC - Mainten - Page 61
Release the tabs along the left, edges of the keyboard using a thin flat-bladed screwdriver.
View all HP G72-257CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Removal and replacement procedures Remove the keyboard: 1. Turn the computer upside down, with the front toward you. 2. Remove the five Phillips PM2.5×5.0 screws that secure the keyboard to the computer. Four of these screws are identified by a keyboard icon embossed on the base enclosure. 3. Turn the computer right-side up, with the front toward you. 4. Open the computer as far as possible. 5. Release the tabs along the left 1 and right 2 edges of the keyboard using a thin flat-bladed screwdriver. 6. Lift the rear edge of the keyboard 3, and set the keyboard back towards the display 4. Maintenance and Service Guide 4-19
Removal and replacement procedures
Maintenance and Service Guide
4–19
Remove the keyboard:
1. Turn the computer upside down, with the front toward you.
2. Remove the five Phillips PM2.5×5.0 screws that secure the keyboard to the computer. Four of these screws are
identified by a keyboard icon embossed on the base enclosure.
3. Turn the computer right-side up, with the front toward you.
4. Open the computer as far as possible.
5. Release the tabs along the left
1
and right
2
edges of the keyboard using a thin flat-bladed screwdriver.
6. Lift the rear edge of the keyboard
3
, and set the keyboard back towards the display
4
.