HP Indigo 30000 CA493-00130 Rev - Page 11
Replacing the carbon brush housing,
View all HP Indigo 30000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
6. Insert the new carbon brush into position. Figure 3-8 Carbon brush 7. Install the carbon brush cap. 8. Repeat the above procedure for the second carbon brush. 9. Reinstall the rubber charge roller from the charge roller assembly. 10. Reinstall the charge roller assembly to the press. Replacing the carbon brush housing Do the following: 1. Remove the charge roller assembly from the press. 2. Remove the rubber charge roller from the charge roller assembly. 3. Unscrew the carbon brush caps. Figure 3-9 Removing the carbon brush caps Replacing the carbon brush housing 9
6.
Insert the new carbon brush into position.
Figure 3-8
Carbon brush
7.
Install the carbon brush cap.
8.
Repeat the above procedure for the second carbon brush.
9.
Reinstall the rubber charge roller from the charge roller assembly.
10.
Reinstall the charge roller assembly to the press.
Replacing the carbon brush housing
Do the following:
1.
Remove the charge roller assembly from the press.
2.
Remove the rubber charge roller from the charge roller assembly.
3.
Unscrew the carbon brush caps.
Figure 3-9
Removing the carbon brush caps
Replacing the carbon brush housing
9