HP Indigo 30000 CA493-00130 Rev - Page 19

Remove the 5 screws on the side of the endcap with a Philips screwdriver.

Page 19 highlights

14. Remove the front endcap by removing the 2 screws near the motor with a 3mm hex key. Remove the rear endcap by removing the 2 screws on the back with a 2.5mm hex key. Figure 3-24 Removing the endcaps 15. Remove the 5 screws on the side of the endcap with a Philips screwdriver. Figure 3-25 Removing the screws in the endcap Replacing the Jump-Over-Seam (JOS) motor 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33

14.
Remove the front endcap by removing the 2 screws near the motor with a 3mm hex key. Remove the
rear endcap by removing the 2 screws on the back with a 2.5mm hex key.
Figure 3-24
Removing the endcaps
15.
Remove the 5 screws on the side of the endcap with a Philips screwdriver.
Figure 3-25
Removing the screws in the endcap
Replacing the Jump-Over-Seam (JOS) motor
17