HP Indigo 30000 CA493-00130 Rev - Page 14

Replacing the Jump-Over-Seam (JOS) motor

Get HP Indigo 30000 PDF manuals and user guides View all HP Indigo 30000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

10. Push the carbon brush housing out of the assembly. Figure 3-16 Pushing on carbon brush housing 11. Remove carbon brush housing Figure 3-17 Removing the housing 12. Install new carbon brush housings 13. Return the end cap cover. 14. Install the carbon brushes. 15. Return the brush caps. 16. Reinstall the rubber charge roller from the charge roller assembly. 17. Reinstall the charge roller assembly to the press. Replacing the Jump-Over-Seam (JOS) motor Each charge roller contains two JOS motors. The following procedure is applicable to both motors. 1. Remove the charge roller assembly from the press. 2. Remove the rubber charge roller from the charge roller assembly. 12 Chapter 3 Procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
10.
Push the carbon brush housing out of the assembly.
Figure 3-16
Pushing on carbon brush housing
11.
Remove carbon brush housing
Figure 3-17
Removing the housing
12.
Install new carbon brush housings
13.
Return the end cap cover.
14.
Install the carbon brushes.
15.
Return the brush caps.
16.
Reinstall the rubber charge roller from the charge roller assembly.
17.
Reinstall the charge roller assembly to the press.
Replacing the Jump-Over-Seam (JOS) motor
Each charge roller contains two JOS motors. The following procedure is applicable to both motors.
1.
Remove the charge roller assembly from the press.
2.
Remove the rubber charge roller from the charge roller assembly.
12
Chapter 3
Procedures