Home » HP Manuals » Tower Cases » HP Integrity BLc7000 » Manual Viewer

HP Integrity BLc7000 HP 10GbE Pass-Thru Module User Guide - Page 24

Technical specifications

View all HP Integrity BLc7000 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

Technical specifications General specifications Category Auto-negotiation standard: Specification ANSI/IEEE 802.3 Nway Auto-Negotiation Protocols: Data transfer rates: CSMA/CD Gigabit Ethernet Full-Duplex: 2000 Mb/s 10Gb Ethernet Full-Duplex: 20000 Mb/s Connectors: 10GbE Pass-Thru Module 16 SFP+ module connectors 10Gb multimode fiber optic cable 10Gb singlemode fiber optic cable Number of ports per module: 62.5/125 or 50/125 microns 9/25 micron 16 x 10GbE/1000-Mb/s ports 1 x serial RS-232 mini-USB to DB-9 front panel management serial port Port names Port 1 2 3 4 5 6 7 8 9 10 11 Link Up/Downlink Up/Downlink Up/Downlink Up/Downlink Up/Downlink Up/Downlink Up/Downlink Up/Downlink Up/Downlink Up/Downlink Up/Downlink Ena Dis/Ena Dis/Ena Dis/Ena Dis/Ena Dis/Ena Dis/Ena Dis/Ena Dis/Ena Dis/Ena Dis/Ena Dis/Ena Speed 1Gb/10Gb 1Gb/10Gb 1Gb/10Gb 1Gb/10Gb 1Gb/10Gb 1Gb/10Gb 1Gb/10Gb 1Gb/10Gb 1Gb/10Gb 1Gb/10Gb 1Gb/10Gb Neg On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off On/Off Approved Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No Yes/No Technical specifications 24

Section	Page
10GbE Pass-Thru Module User Guide	1
Notice	2
Contents	3
Introduction	5
Features	5
Enterprise class performance	5
Configuration and management	5
Diagnostic tools	5
Pass-thru module architecture	5
Port mapping	6
Dual pass-thru modules	6
Redundant paths to server bays	6
XModem	6
Component identification	7
10GbE Pass-Thru Module front panel	7
Installing the pass-thru module	9
Manually configuring the pass-thru module	9
Module security	9
Installing the module	9
Accessing the pass-thru module CLI	10
Accessing the pass-thru module CLI remotely	10
Accessing the pass-thru module CLI locally	11
Production mode CLI	11
CLI menu	11
Installing SFP+ transceivers	12
Replacing a pass-thru module	13
Replacing an existing module	13
Updating the 10GbE pass-thru firmware	14
Methods for updating the 10GbE Pass-Thru Module firmware	14
Updating the firmware image using the Onboard Administrator CLI	14
Updating the firmware image using a USB key and the Onboard Administrator CLI	17
Updating the 10GbE Pass-Thru Module firmware using the pass-thru serial port	18
Performing a serial firmware image download	18
Updating the firmware image using the serial port	18
For more information	20
Additional references	20
Troubleshooting	21
Health LED on the pass-thru module is not on	21
Health LED on the pass-thru module stays amber for more than 30 seconds and pass-thru module does not boot	21
No link LED appears, even after you plug the cable into the SFP+ module	21
Cannot access the pass-thru module serial console interface using an RS232 connection from a PC Terminal Emulation Program	22
Error message appears on the serial console screen that the pass-thru module failed to complete the system self-test	22
The keyboard locks up when you use HyperTerminal to log in to the pass-thru module through the console interface	22
Cannot connect to the pass-thru module console interface remotely using Onboard Administrator	22
The download fails after starting to download the firmware file	23
The pass-thru module configuration is corrupt	23
SFP+ transceiver port is disabled	23
Technical specifications	24
General specifications	24
Port names	24
Physical and environmental specifications	25
Mini-USB to DB-9 serial adapter pin assignment	25
Regulatory compliance notices	27
Class A equipment	27
Modifications	27
Cables	27
Canadian notice	27
European Union regulatory notice	27
Japanese class A notice	28
Korean class A notice	28
Laser compliance	28
Electrostatic discharge	30
Preventing electrostatic discharge	30
Grounding methods to prevent electrostatic discharge	30
Acronyms and abbreviations	31

Match case Limit results 1 per page

Technical specifications 24

Technical specifications

General specifications