Home » HP Manuals » Tower Cases » HP Integrity BLc7000 » Manual Viewer

HP Integrity BLc7000 HP 10GbE Pass-Thru Module User Guide - Page 25

Physical and environmental specifications, Mini-USB to DB-9 serial adapter pin assignment

View all HP Integrity BLc7000 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Port Link Ena Speed Neg Approved 12 Up/Downlink Dis/Ena 1Gb/10Gb On/Off Yes/No 13 Up/Downlink Dis/Ena 1Gb/10Gb On/Off Yes/No 14 Up/Downlink Dis/Ena 1Gb/10Gb On/Off Yes/No 15 Up/Downlink Dis/Ena 1Gb/10Gb On/Off Yes/No 16 Up/Downlink Dis/Ena 1Gb/10Gb On/Off Yes/No Physical and environmental specifications Category Specification DC inputs 12 VDC: 6.25 A maximum per pass-thru module Power consumption 75 W maximum per pass-thru module Operating temperature 10° to 35° C (50° to 95° F) Storage temperature -40° to 70° C (-40° to 158° F) Operating humidity 5% to 95% RH noncondensing Storage humidity 5% to 95% RH noncondensing Pass-thru module dimensions Weight 267.7 x 192.79 x 27.94 mm (10.5 x 7.5 x 1.1 in.) 1.7 Kg (3.7 lbs.) Safety • TUV to UL 60950-1, and CAN/CSA C22.2 No. 60950-1 and to EN 60950-1 • CE Marking • RoHS 6/6 compliant Mini-USB to DB-9 serial adapter pin assignment From Wire To Connector DSUB9F Contact 2 3 5 1 4 6 7 8 Black Connector Mini-USB White Green DB-9 pins 1, 4, and 6 are connected. Contact 3 2 5 DB-9 pins 7 and 8 are connected. Technical specifications 25

Section	Page
10GbE Pass-Thru Module User Guide	1
Notice	2
Contents	3
Introduction	5
Features	5
Enterprise class performance	5
Configuration and management	5
Diagnostic tools	5
Pass-thru module architecture	5
Port mapping	6
Dual pass-thru modules	6
Redundant paths to server bays	6
XModem	6
Component identification	7
10GbE Pass-Thru Module front panel	7
Installing the pass-thru module	9
Manually configuring the pass-thru module	9
Module security	9
Installing the module	9
Accessing the pass-thru module CLI	10
Accessing the pass-thru module CLI remotely	10
Accessing the pass-thru module CLI locally	11
Production mode CLI	11
CLI menu	11
Installing SFP+ transceivers	12
Replacing a pass-thru module	13
Replacing an existing module	13
Updating the 10GbE pass-thru firmware	14
Methods for updating the 10GbE Pass-Thru Module firmware	14
Updating the firmware image using the Onboard Administrator CLI	14
Updating the firmware image using a USB key and the Onboard Administrator CLI	17
Updating the 10GbE Pass-Thru Module firmware using the pass-thru serial port	18
Performing a serial firmware image download	18
Updating the firmware image using the serial port	18
For more information	20
Additional references	20
Troubleshooting	21
Health LED on the pass-thru module is not on	21
Health LED on the pass-thru module stays amber for more than 30 seconds and pass-thru module does not boot	21
No link LED appears, even after you plug the cable into the SFP+ module	21
Cannot access the pass-thru module serial console interface using an RS232 connection from a PC Terminal Emulation Program	22
Error message appears on the serial console screen that the pass-thru module failed to complete the system self-test	22
The keyboard locks up when you use HyperTerminal to log in to the pass-thru module through the console interface	22
Cannot connect to the pass-thru module console interface remotely using Onboard Administrator	22
The download fails after starting to download the firmware file	23
The pass-thru module configuration is corrupt	23
SFP+ transceiver port is disabled	23
Technical specifications	24
General specifications	24
Port names	24
Physical and environmental specifications	25
Mini-USB to DB-9 serial adapter pin assignment	25
Regulatory compliance notices	27
Class A equipment	27
Modifications	27
Cables	27
Canadian notice	27
European Union regulatory notice	27
Japanese class A notice	28
Korean class A notice	28
Laser compliance	28
Electrostatic discharge	30
Preventing electrostatic discharge	30
Grounding methods to prevent electrostatic discharge	30
Acronyms and abbreviations	31