HP Integrity rx5670 Hardware Installation Guide - HP Integrity rx5670 (A6837B/ - Page 64
The LC Command Screen, New LAN Configuration * modified value
View all HP Integrity rx5670 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Cable Connections Core I/O Connections The screen displays the default values and asks if you want to modify them. It is good practice to write down the information, as it may be required for future troubleshooting. Figure 4-3 The LC Command Screen MP:CM> lc -ip 127.0.0.1 -host uninitialiized -mask 255.255.255.0 -gate 127.0.0.1 -web 2003 New LAN Configuration (* modified value) : * IP Address : 127.0.0.1 * MP Host Name : uninitialized * Subnet Mask : 255.255.255.0 * Gateway Address : 127.0.0.1 Link State : Auto Negotiate * Web Console Port Number : 2023 Confirm? (Y/ {N} ) : y -> LAN configuration has been updated -> Reset the MP (XD command option 'R' ) for confirmation to take effect. MP Host Name : uninitialized MP:CM> xd -reset -> MP reset requested Confirm? (Y/ {N} ) : y MP is now being reset NOTE The value in the "IP address" field is set at the factory. The customer must provide the actual management processor LAN IP address. 3. The current lc data is displayed. When prompted to enter a parameter name, A to modify All, or Q to Quit, enter A to select all parameters. 4. The current IP address is displayed. When prompted to enter a new value or Q, enter the new IP address. 5. The current host name is displayed. When prompted to enter a new value or Q, enter the new management processor network name. This is the host name for the management processor LAN, The name can be up to 64 characters in length, and can include dashes, underlines, periods and spaces. 6. The current subnet mask name is displayed. When prompted to enter a new value or Q, enter the new subnet mask name. 7. The current gateway address is displayed. When prompted to enter a new value or Q, enter new the gateway address. 8. The current web console port number is displayed. When prompted to enter a new value or Q, just hit enter. The message "-> Current Web Console Port Number has been retained" will be displayed. 64 Chapter 4