HP Jet Fusion 300 User Guide - Page 4

Introduction...31 File preparation...31 7 Prepare a job...45 Introduction...45 Build packing basic guidelines...45 Job settings selection ...45 8 Send a job...49 9 Select a job...51 Job list app...51 Select a job to be printed ...51 10 Printer preparation...53 Job preparation list ...53 Agents ...53 Material ...56 Distilled or deionized water ...60 How to recycle consumables and printed parts ...62 11 Print ...63 Indemnity to HP for 3D parts printed by the printer...63 Cancel a job ...63 Check status on the front panel...63 Check status remotely...65 Possible errors while printing...65 Printing and Cooling Profiles ...66 12 Cooling and part retrieval...67 Part retrieval ...67 Keeping the printer clean ...68 13 Post-processing...69 14 Troubleshooting ...71 Network troubleshooting...71 Start-up issues...72 Power-on issues ...72 Agent troubleshooting...72 Material cartridge troubleshooting...75 Printhead health troubleshooting ...75 How to get the diagnostic package ...90 Water tank refill too slow troubleshooting...91 15 Maintenance ...93 Safety precautions ...93 General cleaning instructions...93 Maintenance resources...94 Maintenance tools recommended but not provided ...94 Printer maintenance schedule ...98 Clean the print area...99 Wipe the recoating roller...103 Scrape and wipe the fusing lamp ...104 Vacuum the air exhaust filter compartment...108 Vacuum the material reclamation sieve drawer ...111 Clean the inside of the viewing window (500 series only)...113 Clean the build-chamber front rail ...114 Clean the scanner...114 Replace a fusing lamp ...117 Replace the cleaning roll ...121 Replace the material reclamation filter ...126 Replace the air exhaust filter...129 Replace a printhead ...132 iv