HP Jet Fusion 300 User Guide - Page 48
Repairing files, Magics - Materialise
View all HP Jet Fusion 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Figure 6-1 Example of tessellation ● Holes in triangles STL models commonly suffer from surfaces that are not joined to their neighbors, and missing surfaces. Repairing files File-repairing software ● Magics - Materialise ● Autodesk Netfabb ● HP SmartStream 3D Build Manager Common errors Some common errors that cause part-quality-related issues are illustrated below. They can be fixed in the native CAD software; or, if that is not available, in Magics, Netfabb, or HP Smartstream 3D Build Manager. If these files are not fixed before attempting to build the design, either the software will not allow you to proceed due to poor file quality, or your part will not have good quality. Therefore, it is prudent to spend time at this stage to check that the CAD file designer produced a high-quality and printable design. ● Triangles not joined ● Overlapping triangles 42 Chapter 6 Design and printing guidelines