HP Kayak XA 05xx HP Kayak XA Series 05xx, Accessories Installation Guide For M - Page 19

If you are installing a SCSI device, pass the SCSI cable through the, SCSI holder to do this.

Page 19 highlights

HP Kayak XA 05xx PC Workstation - Installing Accessories In Your HP Minitower PC Workstation Installing Mass Storage Devices 7 Locate the appropriate data cable for the device. Flexible Disk Drive Cable Up to 15 SCSI devices can be connected to the internal and external SCSI connectors. IDE drives should be connected to a free IDE channel cable connector (you can have up to four IDE devices) Wide SCSI devices should be connected to a free SCSI connector on the SCSI cable. 8 Connect the data and power cables to the rear of the device. (The connectors are shaped to go in one way only.) Data Cable Power Cable 9 If you are installing a SCSI device, pass the SCSI cable through the base of the SCSI holder. You will need to remove then replace the SCSI holder to do this. English 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

English
19
HP Kayak XA 05xx PC Workstation
— Installing Accessories In Your HP Minitower PC Workstation
Installing Mass Storage Devices
7
Locate the appropriate data cable for the device.
8
Connect the data and power cables to the rear of the device. (
The
connectors are shaped to go in one way only
.)
9
If you are installing a SCSI device, pass the SCSI cable through the
base of the SCSI holder. You will need to remove then replace the
SCSI holder to do this.
Flexible Disk Drive Cable
IDE drives should be
connected to a free IDE
channel cable connector
(you can have up to four
IDE devices)
Wide SCSI devices should be connected to
a free SCSI connector on the SCSI cable.
Up to 15 SCSI devices can be
connected to the internal and
external SCSI connectors.
Power Cable
Data Cable