HP Kayak XA 05xx HP Kayak XA Series 05xx, Accessories Installation Guide For M - Page 7

CAUTION HP Kayak XA 05xx PC Workstation - Installing Accessories In Your HP Minitower PC Workstation Installing Memory Installing Memory Main Memory Modules If you need more main memory, you can install up to 768 MB of memory in three 100 MHz DIMM slots. Main memory upgrades are available in single unbuffered 32 MB, 64 MB, 128 MB or 256 MB SDRAM memory modules. Static electricity can damage electronic components. Turn off all equipment. Do not let your clothes touch the accessory. To equalize the static electricity, rest the accessory bag on top of the power supply while you are removing the accessory from the bag. Handle the accessory as little as possible and with car To install a main memory module: 1 Disconnect the computer's power cord and any LAN or telecommunications cable. 2 Remove the computer's cover (see page 3). 3 Remove the fan connection to the system board (see the illustration on page 5). 4 Press the retaining buttons on each side of the HP UltraFlow airflow guide and lift it out of the PC Workstation's case. 5 Remove the airflow guide covering the processor sockets (if needed). 6 Remove the transparent SCSI holder to provide easy access to the memory module slots. English 7