HP Kayak XU 04xx HP Kayak XU Series 04xx, Accessories Installation Guide - Page 12
Installing a Hard Disk Drive in a Front-Access Shelf, Remove the computer's cover refer
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
NOTE HP Kayak XU PC Workstation - Installing Accessories In Your HP PC Workstation Installing Mass Storage Devices Installing a Hard Disk Drive in a Front-Access Shelf To ensure your hard disk drive is properly located and cooled, you should only install drives that are up to one inch (1") in height and of a speed equal to or less than 7200 rpm in this shelf. 1 Disconnect the computer's power cord and any LAN or telecommunications cable. 2 Remove the computer's cover (refer to page 3). 3 Remove the HP UltraFlow airflow guide (refer to page 5). 4 Unscrew and remove an unused drive tray. Remove the drive tray 5 Mount the drive on the tray as shown below. Set the drive on the tray Fix the drive to the tray 12 English
HP Kayak XU PC Workstation
— Installing Accessories In Your HP PC Workstation
Installing Mass Storage Devices
12
English
Installing a Hard Disk Drive in a Front-Access Shelf
NOTE
To ensure your hard disk drive is properly located and cooled, you
should only install drives that are up to one inch (1”) in height and of a
speed equal to or less than 7200 rpm in this shelf.
1
Disconnect the computer’s power cord and any LAN or
telecommunications cable.
2
Remove the computer’s cover (refer to page 3).
3
Remove the HP UltraFlow airflow guide (refer to page 5).
4
Unscrew and remove an unused drive tray.
5
Mount the drive on the tray as shown below.
Remove the
drive tray
Set the drive on
the tray
Fix the drive to
the tray