HP Kayak XU 04xx HP Kayak XU Series 04xx, Accessories Installation Guide - Page 20
Completing the, Installation of an ISA, Accessory Board, Setup, IRQ 11, Reserved, Available
View all HP Kayak XU 04xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
HP Kayak XU PC Workstation - Installing Accessories In Your HP PC Workstation Installing Accessory Boards 6 Align the board's connector with the slot's socket. Firmly press the board into the socket. Ensure the board's connector engages completely with the socket and does not touch components on other boards. 7 Secure the board by replacing the slot cover screw. If you loosened the screws on adjacent slots, remember to tighten them. Secure the board in position 8 Install any other accessories before replacing the cover (refer to page 4). Reconnect all cables and power cords. Completing the Installation of an ISA Accessory Board If you have installed an ISA accessory board that uses an interrupt, you must run the Setup program and reserve the IRQ for the accessory board. 1 Turn on the PC Workstation and press appears. when Setup 2 In the Setup program, select the Advanced menu and the ISA Resource Exclusion submenu. A list of IRQs and the devices that use them is displayed. Highlight the IRQ field you want to change, for example IRQ 11. 3 You can use the space bar or press or to make the IRQ reserved for ISA (Reserved) or make it available for PCI (Available). 4 Press to save any changes you made and exit the Setup program. NOTE You should always leave at least one IRQ available for use by the integrated PCI devices. 20 English