HP Kayak XW U3-W3 HP 10BT/100TX Night Director/100 Ethernet Card Installation - Page 14
Pre-installation Procedure, Pre-installation on a Windows 95 System - removal
View all HP Kayak XW U3-W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
CAUTION 1 Installing the HP LAN Card Pre-installation Procedure Pre-installation Procedure Perform the pre-installation before you physically install the HP LAN card in the PC. Pre-installation on a Windows 95 System 1 With Windows 95 running, insert the HP LAN Setup diskette into the diskette drive. 2 Click Start, and then Run.... The Run dialog box opens. 3 In the command line, type a:\setup and click OK. A network setup dialog box opens. 4 Click Next. A second network setup dialog box opens. 5 Click Finish. The PC reboots under DOS and displays a message asking you whether there is another LAN card already installed. 6 Type n, then remove the HP LAN Setup diskette from the diskette drive and turn off the PC. 7 Now go to "Installing the HP LAN Card" on page 8. Pre-installation on a Windows NT 4.0 System 1 With Windows NT running, insert the HP LAN Setup diskette into the diskette drive. 2 Click Start, then Run.... 3 In the command line, type a:\setup and click OK. An account information dialog box opens. 4 Enter the name of an account which is a member of the administrator group, and the corresponding password. If you are already logged on with administrator's rights, the field for the account name is automatically filled in with your account name. 5 Click Next. A dialog box is displayed. 6 English 14