HP Kayak XW U3-W3 HP 10BT/100TX Night Director/100 Ethernet Card Installation - Page 19
Connecting to a Network, Checking the Installation, Remote Wake Up, RWU and Remote, Power On RPO
View all HP Kayak XW U3-W3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
1 Installing the HP LAN Card Connecting to a Network Connecting to a Network Connect the network cable to the RJ-45 UTP (Unshielded Twisted Pair) LAN connector. The LAN card supports both 10 Mbits/s and 100 Mbits/s operation. 10BT/100TX Connector Remote Wake Up (RWU) and Remote Power On (RPO) The HP LAN card has the ability to power up the PC upon receipt of a special sequence (known as a Magic PacketTM) from the network. The RWU mode allows the PC to resume normal functioning when it is in sleep (suspend) mode. The RPO mode allows the PC to start when it is switched off. Checking the Installation Test whether the HP LAN card functions on the network by finding another network device or performing a network operation. If it does not work correctly, refer to "Troubleshooting" on page 12. English 11 19