HP LH4r HP Netserver 10/100TX PCI LAN Adapter Guide - Page 19
Configuring the Adapter and, Installing Drivers
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
5 Configuring the Adapter and Installing Drivers Novell NetWare 5.0 Only Use the NetWare Install program to install the HP NetServer 10/100 adapter driver in Novell NetWare 5.0. For Novell NetWare 4.1x, see the Novell NetWare 4.1x or 4.2 Only section following this section. For Novell NetWare 3.11, 3.12 and 3.2, see the ReadMe files. The following procedure is a condensed description of the installation process: 1. From the NetWare console, type NWCONFIG and press Enter. 2. From the Configuration Options screen, choose Driver Options and press Enter. 3. Choose Configure network drivers and press Enter. If any drivers are already loaded, a list of them appears. 4. Choose Select an additional driver and press Enter. A list of drivers appears. 5. Insert the HP NetServer 10/100TX PCI LAN Adapter Drivers CD into the CD-ROM drive and press the Insert key to install an unlisted driver. 6. To specify the correct path to your media (if necessary), press F3. Press Enter to search the floppy or CD-ROM drive. To install from the CD, type the CD Volume Name: \NetWare Server Name. For example, HPTX_PCI_A+:\NWSERVER. 7. Select the appropriate HP PCI LAN Adapter and press Enter. 8. Respond to the Copy and Save prompts. 9. Use the arrow keys to select additional protocol types, F3 to manually set IPX Frame types, or choose the defaults. 10. Enter the slot number. (You can find the slot number by switching to the Console and manually loading the driver. A list of available slot numbers is displayed. Then abort 11