HP LH4r HP Netserver LXr 8000 Memory Upgrade Guide - Page 28
connector at a 90
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3. Refer to Figures 2-1, 2-2, 2-3, 2-4, 2-5, and 2-6. Locate the slot where you will install the DIMM, and spread the two DIMM retaining clips outward. See Figure 2-10. Figure 2-10. Installing a DIMM Module 4. Align the notches on the DIMM with the notches on the socket. 5. Hold the DIMM so that the front edge faces straight down into the connector (at a 90° angle to the memory board). 6. Insert the DIMM carefully into the desired slot. The retaining clips will grasp the DIMM automatically if it is inserted properly. 22
22
3.
Refer to Figures 2-1, 2-2, 2-3, 2-4, 2-5, and 2-6. Locate the slot
where you will install the DIMM, and spread the two DIMM
retaining clips outward. See Figure 2-10.
Figure 2-10. Installing a DIMM Module
4.
Align the notches on the DIMM with the notches on the socket.
5.
Hold the DIMM so that the front edge faces straight down into the
connector (at a 90
°
angle to the memory board).
6.
Insert the DIMM carefully into the desired slot. The retaining
clips will grasp the DIMM automatically if it is inserted properly.