HP LH4r HP Netserver LXr Pro8 Remote Administrator Guide - Page 14

Chapter 2 Installing HP Remote Console Redirection 4. The HP Modem Initialization Utility also allows for a case-sensitive password. You can enter any alphanumeric combination up to 20 characters in the space provided. The password you enter here will be required for remote access to the HP NetServer. 5. Tab to OK and press Enter. The HP Modem Initialization Utility saves the modem initialization string and password, and informs you that initialization is about to occur. HP Modem Initialization Utility When you select Yes, the utility initialized the modem and then puts the server in standby mode until contacted by the remote console. >Yes< 6. Select Yes to initialize the modem. (Cancel returns you to the HP Utility Partition's Main Menu.) HP Modem Initialization Utility Waiting for remote login. . . Press the space bar to abort remote console access. The HP NetServer awaits a call from the remote console and is functionally disabled until a connection is made. To disable password protection and return to normal NetServer operation, press the space bar. NOTE Once the NetServer's modem has been initialized, your HP NetServer awaits a call from the remote console and is functionally disabled until a connection is made. Setup at the Remote Console You can use pcANYWHERE32 (shipped with each HP NetServer ). Or, you may use any standard communications program to establish a simple, character-based terminal connection from a console workstation to the HP NetServer. The advantage of using pcANYWHERE32 is that it is pre-configured for HP Remote Console. 10