HP LH4r NetWare Installation Guide - Page 19

C:\NWSERVER\server 4. Enter the commands: LOAD C:MSM LOAD C:ETHERTSM LOAD HPTX Frame=Ethernet_802.2 BIND IPX TO HPTX Note the slot number for the HPTX driver when it loads. 5. Enter the command: LOAD INSTALL 6. In the " NCF files options " menu, select "Create AUTOEXEC.NCF file". 7. Add the following lines above the "LOAD HPTX" line: LOAD C:MSM LOAD C:ETHERTSM 8. Change the "LOAD HPTX ..." line to "LOAD HPTX SLOT=x ...", where x is the slot number for the HPTX driver, which you noted when you loaded the driver. 9. Press to save the file. Installing the J3171A LAN Card Driver on NetWare 4.11/IntranetWare If install is unable to find a matching driver for a PCI LAN controller, press. At the "Choose the Server Drivers" screen: 1. Press (to install an unlisted driver). 2. Insert the Drivers Diskette in drive A. 3. Press . 4. Enter for network drivers: A:\J3171A\NW411 5. Select HPTX.LAN and press . Do not specify Slot Number in the "HPTX_1 Parameters" screen. If install finds more than one matching driver for a PCI LAN controller: Install found the following hardware but found more that one driver supporting this hardware: PCI.8086.1229.0000.0000.01 Press for a list of drivers to choose from or to continue 1. Press key 2. High light the driver HPTX.LAN (HP 10/100 PCI Ethernet Adapter)