HP LH4r NetWare Installation Guide - Page 20
Installing NetWare on HP NetServer LX with, 4GB Memory, On-Line Information
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
3. Press key to choose the driver and continue the installation process. Do not specify Slot Number in the "HPTX_1 Parameters" screen Section 4. Installing NetWare on HP NetServer LX with 4GB Memory The following is the procedure on how to install NetWare on an HP NetServer LX system with 4GB of memory. Installing NetWare 3.12 on HP NetServer LX with 4GB of Memory You need do nothing additional to Install NetWare 3.12 on HP NetServer LX with 4GB memory. NetWare 3.12 will recognize the full 4GB in the system with no extra effort. Installing NetWare 4.10 on HP NetServer LX with 4GB of Memory Currently, there is no support for installing NetWare 4.10 on HP NetServer LX with 4GB of memory. Installing NetWare 4.11/IntranetWare on an HP NetServer LX with 4GB of Memory Installing NetWare 4.11/IntranetWare in HP NetServer LX with 4GB memory needs a special procedure. Follow the instruction closely to avoid system hang problem. 1. Install NetWare 4.11/IntranetWare, with memory less than 2GB, as described in the previous sections. 2. Install NetWare 4.11/IntranetWare Support Pack v2.0. The Support Pack v2.0 is available on Novell web site www.support.novell.com under Minimum Updates page. 3. After NetWare 4.11/IntranetWare installation is done, exit NetWare and swap memory to 4GB. Use HP Navigator CD to reconfigure the system to recognize 4GB memory. 4. Boot up system to NetWare. NetWare will recognize the memory without hanging the system. NOTE NetWare 4.11/IntranetWare will only recognize 3.26GB out of the 4GB of memory in the system. This is NetWare 4.11/IntranetWare limitation. Section 5. On-Line Information and Software Sources Novell Networking BBS:801-429-3308 (9,600 baud) HP BBS:208-344-1691 (14,400 baud)